[. . . ] Use only the supplied mounting hardware for a safe and secure installation. How to detach and attach the front panel Before installing the unit, detach the front panel. Before detaching the front panel, be sure to press (OFF) to turn off the unit. [. . . ] Before detaching the front panel, be sure to press (OFF) to turn off the unit. Then press (RELEASE), slide the front panel a little to the left, and pull it off toward you. With the TOP making up con la marca TOP hacia arriba ±a TOP TM ±¥¬§W°C Bend these claws, if necessary. You may not be able to install this unit in some makes of Japanese cars. 5 × 8 mm Bracket Soporte §¨[ Existing parts supplied to your car Piezas existentes suministradas con su automóvil ¶w ÀÆ. Existing parts supplied to your car Piezas existentes suministradas con su automóvil ¶w ÀÆ. Before making connections, disconnect the earth terminal of the car battery to avoid short circuts. To the +12 V power terminal which is energized in the accessory position of the ignition key switch Be sure to connect the black earth lead to it first. To the +12 V power terminal which is energized at all times Be sure to connect the black earth lead to it first. To a metal point of the car First connect the black earth lead, then connect the yellow and red power input leads. The AMP/ANT REM lead (blue/white) supplies +12 V DC when you turn on the unit. When the AMP/ANT REM lead is connected to the power antenna, the antenna will be extended as long as the unit is turned on. Memory hold connection When the yellow power input lead is connected, power will always be supplied to the memory circuit even when the ignition key is turned off. notes on speaker connection · Before connecting the speakers, turn the unit off. [. . . ] When the AMP/ANT REM lead is connected to the power antenna, the antenna will be extended as long as the unit is turned on. Memory hold connection When the yellow power input lead is connected, power will always be supplied to the memory circuit even when the ignition key is turned off. notes on speaker connection · Before connecting the speakers, turn the unit off. [. . . ]